Friends who have used ultrasonic cleaning machine has not encountered the phenomenon of ultrasonic cleaning machine vibration. So what is the reason for this phenomenon, don't worry about the following I will discuss it with you.
1, automatic ultrasonic cleaning machine used for a long time, the transducer aging, performance decay, repair methods can be appropriate to increase the ultrasonic power, but this method will cause the heat of the transducer to increase, can not solve the problem at all, it is recommended to replace all the transducer.
2, part of the transducer is damaged, the bad transducer will be replaced with the matching transducer.
3, power supply and transducer drift re-adjust the working point.
4, automatic ultrasonic cleaning machine design power is small, replace or modify the power supply, increase the number of transducers.
5, automatic ultrasonic cleaning machines' working environment, such as the type of cleaning agent, cleaning temperature, liquid level depth, and other effects.
6, other unknown circumstances caused by the weakening of ultrasonic waves, such as the placement of cleaning materials, cleaning agent replacement, etc.
Circuit board ultrasonic cleaning machine features.
Advantage one: fast cleaning speed. Ultrasonic cleaning machine rates for other cleaning methods are higher than the immersion type cleaning 10 to 20 times faster than spray cleaning to improve the efficacy of 20% a 50%.
Advantage two: all-around cleaning without dead ends. Compared with the spray and with the immersion, it does not clean dead ends, so it is more suitable for an internal and external structure that is complex, microscopic uneven, there are slits, small holes, corners, and line-intensive electronic circuit board.
Advantage three: the circuit board will not be damaged by deformation. Compared with the spray, a professional ultrasonic cleaning machine cleaning thin and tiny circuit boards will also ensure that the circuit board is intact.
Advantage four: adapt to clean a variety of stains. Can be used to remove oil, stain, rust, oxide, passivation, and many other stubborn stains.
Advantage five: wide range of applicable materials. Professional ultrasonic cleaning machine for steel, cast iron, stainless steel, copper, aluminum, glass, circuit boards, electronic and optical components, and other parts of the cleaning work.
Advantage six: good cleaning consistency. Regardless of the need to clean the circuit board is wide or narrow, is a big thing or small, complex structure or simple, single or batch, into the ultrasonic cleaning machine after cleaning, can be obtained by hand cleaning incomparable uniformity of cleanliness.
